View MC10H601FN_744277.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MC10H601, MC100H601 9-Bit ECL to TTL Translator
Description
The MC10H/100H601 is a 9-bit, dual supply ECL to TTL translator. Devices in the ON Semiconductor 9-bit translator series utilize the 28-lead PLCC for optimal power pinning, signal flow-through and electrical performance. The devices feature a 48 mA TTL output stage, and AC performance is specified into both a 50 pF and 200 pF load capacitance. For the 3-state output disable, both ECL and TTL control inputs are provided, allowing maximum design flexibility. The 10H version is compatible with MECL 10HTM ECL logic levels. The 100H version is compatible with 100K levels.
Features
http://onsemi.com
* * * * * * * * *
9-Bit Ideal for Byte-Parity Applications 3-State TTL Outputs Flow-Through Configuration Extra TTL and ECL Power Pins to Minimize Switching Noise ECL and TTL 3-State Control Inputs Dual Supply 4.8 ns Max Delay into 50 pF, 9.6 ns into 200 pF (all Outputs Switching) PNP TTL Inputs for Low Loading Pb-Free Packages are Available*
PLCC-28 FN SUFFIX CASE 776
MARKING DIAGRAM*
MCxxxH601G AWLYYWW
xxx A WL YY WW G
= 10 or 100 = Assembly Location = Wafer Lot = Year = Work Week = Pb-Free Package
*For additional marking information, refer to Application Note AND8002/D.
ORDERING INFORMATION
See detailed ordering and shipping information in the package dimensions section on page 4 of this data sheet.
*For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.
(c) Semiconductor Components Industries, LLC, 2006
November, 2006 - Rev. 12
1
Publication Order Number: MC10H601/D
MC10H601, MC100H601
Q5 GND VCCT Q6 GND Q7 Q8
25 24 23 22 21 20 19 18 17 16 15 2 3 4 5 6 7 8 9 10 11 14 13 12
Table 1. PIN NAMES
D8 D7 VCCE D6 D5 D4 D3
Q4 Q3 VCCT Q2 GND Q1 Q0
PIN GND VCCE VCCT VEE D0 -D8 Q0 -Q8 OEECL OETTL
FUNCTION TTL Ground (0 V) ECL VCC (0 V) Supply (+ 5.0 V) ECL Supply (- 5.2 / -4.5 V) Data Inputs (ECL) Data Outputs (TTL) 3-State Control (ECL) 3-State Control (TTL)
26 27 28
OETTL NC OEECL VEE D0 D1
D2
Figure 1. PLCC-28 Pinout (Top View)
OEECL OETTL D0 Q0
Table 2. TRUTH TABLE
OEECL L L H X OETTL L L X H D L H X X Q L H Z Z
D1
Q1
D2
Q2
D3 ECL D4
Q3 Q4 TTL
D5
Q5
D6
Q6 Q7
D7
D8
Q8
Figure 2. Logic Diagram
http://onsemi.com
2
MC10H601, MC100H601
Table 3. 10H ECL DC CHARACTERISTICS: VCCT = 5.0 V 10%; VEE = - 5.2 V 5%
0C Symbol IEE IINH IINL VIH VIL Power Supply Current Input HIGH Current Input LOW Current Input HIGH Voltage Input LOW Voltage 0.5 -1170 -1950 Parameter Min Max -51 255 -840 -1480 0.5 -1130 -1950 Min 25C Max -51 175 -810 -1480 0.5 -1060 -1950 Min 85C Max -51 175 -720 -1445 Unit mA mA mA mV
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit values are applied individually under normal operating conditions and not valid simultaneously.
Table 4. 100H ECL DC CHARACTERISTICS: VCCT = 5.0 V 10%; VEE = - 4.2 V to - 5.5 V
0C Symbol IEE IINH IINL VIH VIL Power Supply Current Input HIGH Current Input LOW Current Input HIGH Voltage Input LOW Voltage 0.5 -1165 -1810 Parameter Min Max -51 255 -880 -1475 0.5 -1165 -1810 Min 25C Max -51 175 -880 -1475 0.5 -1165 -1810 Min 85C Max -53 175 -880 -1475 Unit mA mA mA mV
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit values are applied individually under normal operating conditions and not valid simultaneously.
VEE = - 4.2 V to - 5.5 V (100H version)
Table 5. TTL DC CHARACTERISTICS: VCCT = 5.0 V 10%; VEE = - 5.2 V 5% (10H version);
0C Symbol ICCH ICCL ICCZ IIH IIL IOS IOZH IOZL VIHT VILT VOHT VOLT VIK Power Supply Current Input HIGH Current Input LOW Current Output Short Circuit Current Output Disable Current HIGH Output Disable Current LOW Input HIGH Voltage Input LOW Voltage Output HIGH Voltage Output LOW Voltage Input Clamp Voltage IOH = - 3.0 mA IOH = -15 mA IOL = 48 mA IIN = -18 mA VIN = 2.7 V VIN = 7.0 V VIN = 0.5 V VOUT = 0 V VOUT = 2.7 V VOUT = 0.5 V -100 -50 2.0 2.5 2.0 0.55 -1.2 Parameter Power Supply Current Condition Min Max 110 110 105 20 100 -0.6 -225 50 -100 -50 2.0 2.5 2.0 0.55 -1.2 Min 25C Max 110 110 105 20 100 -0.6 -225 50 -100 -50 2.0 2.5 2.0 0.55 -1.2 Min 85C Max 110 110 105 20 100 -0.6 -225 50 mA mA mA mA V V V V Unit mA
0.8
0.8
0.8
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit values are applied individually under normal operating conditions and not valid simultaneously.
http://onsemi.com
3
MC10H601, MC100H601
Table 6. AC CHARACTERISTICS: VCCT = 5.0 V 10%; VEE = - 5.2 V 5% (10H version); VEE = - 4.2 V to - 5.5 V (100H version)
0C Symbol tPLH tPHL tPLZ tPHZ tPLZ tPHZ tPZL tPZH tPZL tPZH tR tF Output Rise/Fall Time 1.0 V -2.0 V Output Enable Time Parameter Propagation Delay to Output Output Disable Time OEECL OETTL OEECL OETTL Condition CL = 50 pF CL = 200 pF CL = 50 pF CL = 200 pF CL = 50 pF CL = 200 pF CL = 50 pF CL = 200 pF CL = 50 pF CL = 200 pF CL = 50 pF CL = 200 pF Min 1.7 3.4 3.7 5.4 4.3 7.0 3.5 5.0 4.2 6.0 Max 4.8 9.6 6.5 13 7.5 15 6.0 12 7.0 14 1.2 3.0 Min 1.7 3.4 3.7 5.4 4.3 7.0 3.5 5.0 4.2 6.0 25C Max 4.8 9.6 6.5 13 7.5 15 6.0 12 7.0 14 1.2 3.0 Min 1.7 3.4 3.7 5.4 4.3 7.0 3.5 5.0 4.2 6.0 85C Max 4.8 9.6 6.5 13 7.5 15 6.0 12 7.0 14 1.2 3.0 Unit ns ns ns ns ns ns ns ns ns ns ns ns
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit values are applied individually under normal operating conditions and not valid simultaneously.
ORDERING INFORMATION
Device MC10H601FN MC10H601FNG MC10H601FNR2 MC10H601FNR2G MC100H601FN MC100H601FNG MC100H601FNR2 MC100H601FNR2G Package PLCC-28 PLCC-28 (Pb-Free) PLCC-28 PLCC-28 (Pb-Free) PLCC-28 PLCC-28 (Pb-Free) PLCC-28 PLCC-28 (Pb-Free) Shipping 37 Units / Rail 37 Units / Rail 500 / Tape & Reel 500 / Tape & Reel 37 Units / Rail 37 Units / Rail 500 / Tape & Reel 500 / Tape & Reel
For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.
Resource Reference of Application Notes
AN1405/D AN1406/D AN1503/D AN1504/D AN1568/D AN1672/D AND8001/D AND8002/D AND8020/D AND8066/D AND8090/D - ECL Clock Distribution Techniques - Designing with PECL (ECL at +5.0 V) - ECLinPSt I/O SPiCE Modeling Kit - Metastability and the ECLinPS Family - Interfacing Between LVDS and ECL - The ECL Translator Guide - Odd Number Counters Design - Marking and Date Codes - Termination of ECL Logic Devices - Interfacing with ECLinPS - AC Characteristics of ECL Devices
http://onsemi.com
4
MC10H601, MC100H601
PACKAGE DIMENSIONS
PLCC-28 FN SUFFIX PLASTIC PLCC PACKAGE CASE 776-02 ISSUE E
Y BRK D Z -L- -M- B 0.007 (0.180) U
M
T L-M
M
S
N
S S
-N-
0.007 (0.180)
T L-M
N
S
W
28 1
D
V
X VIEW D-D
G1
0.010 (0.250)
S
T L-M
S
N
S
A Z R E G G1 0.010 (0.250)
S
0.007 (0.180) 0.007 (0.180)
M M
T L-M T L-M
S S
N N
S S
H
0.007 (0.180)
M
T L-M
S
N
S
C
K1 0.004 (0.100) -T- SEATING
PLANE
J
K F VIEW S 0.007 (0.180)
M
VIEW S T L-M
S
T L-M
S
N
S
N
S
NOTES: 1. DATUMS -L-, -M-, AND -N- DETERMINED WHERE TOP OF LEAD SHOULDER EXITS PLASTIC BODY AT MOLD PARTING LINE. 2. DIMENSION G1, TRUE POSITION TO BE MEASURED AT DATUM -T-, SEATING PLANE. 3. DIMENSIONS R AND U DO NOT INCLUDE MOLD FLASH. ALLOWABLE MOLD FLASH IS 0.010 (0.250) PER SIDE. 4. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 5. CONTROLLING DIMENSION: INCH. 6. THE PACKAGE TOP MAY BE SMALLER THAN THE PACKAGE BOTTOM BY UP TO 0.012 (0.300). DIMENSIONS R AND U ARE DETERMINED AT THE OUTERMOST EXTREMES OF THE PLASTIC BODY EXCLUSIVE OF MOLD FLASH, TIE BAR BURRS, GATE BURRS AND INTERLEAD FLASH, BUT INCLUDING ANY MISMATCH BETWEEN THE TOP AND BOTTOM OF THE PLASTIC BODY. 7. DIMENSION H DOES NOT INCLUDE DAMBAR PROTRUSION OR INTRUSION. THE DAMBAR PROTRUSION(S) SHALL NOT CAUSE THE H DIMENSION TO BE GREATER THAN 0.037 (0.940). THE DAMBAR INTRUSION(S) SHALL NOT CAUSE THE H DIMENSION TO BE SMALLER THAN 0.025 (0.635).
DIM A B C E F G H J K R U V W X Y Z G1 K1
INCHES MIN MAX 0.485 0.495 0.485 0.495 0.165 0.180 0.090 0.110 0.013 0.019 0.050 BSC 0.026 0.032 0.020 --- 0.025 --- 0.450 0.456 0.450 0.456 0.042 0.048 0.042 0.048 0.042 0.056 --- 0.020 2_ 10_ 0.410 0.430 0.040 ---
MILLIMETERS MIN MAX 12.32 12.57 12.32 12.57 4.20 4.57 2.29 2.79 0.33 0.48 1.27 BSC 0.66 0.81 0.51 --- 0.64 --- 11.43 11.58 11.43 11.58 1.07 1.21 1.07 1.21 1.07 1.42 --- 0.50 2_ 10_ 10.42 10.92 1.02 ---
http://onsemi.com
5
MC10H601, MC100H601
ECLinPS is a trademark of Semiconductor Components Industries, LLC (SCILLC). MECL 10H is a trademark of Motorola, Inc.
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative
http://onsemi.com
6
MC10H601/D

▲Up To Search▲

Price & Availability of MC10H601FN

	To Download MC10H601FN Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .